Start with the paper size, not the machine
The RAW Eco-Plastic Rolling Machine is built for King Size papers, specifically 110mm King Size papers. That single specification decides whether the machine will work for you: if your papers are shorter or longer than 110mm, the apron and base won’t line up with the paper the way the machine expects. Before you load anything, check your paper pack for “110mm” or “King Size” on the label.
The machine itself has a hemp-based plastic base and a thick vinyl rolling apron. The base gives you a stable surface to work on, and the apron is the part that actually guides the paper and material into a roll. Neither part is complicated, but both need to be seated correctly before you start.
What the RAW Eco-Plastic Rolling Machine is built for
- RAW ECO-PLASTIC ROLLING MACHINE | KING SIZE-(110MM): King Size machine that uses 110mm King Size papers This is the compatibility limit: the machine is sized for 110mm papers, so any other paper length is a mismatch.

RAW ECO-PLASTIC ROLLING MACHINE | KING SIZE-(110MM) - RAW ECO-PLASTIC ROLLING MACHINE | KING SIZE-(110MM): Hemp-based plastic base with a thick vinyl rolling apron The base provides the working surface and the apron is the rolling mechanism, so both parts need to be clean and properly aligned.
- RAW ECO-PLASTIC ROLLING MACHINE | KING SIZE-(110MM): Includes 1 x RAW roller You get the rolling machine itself; papers and material are separate, so confirm you have 110mm papers before you begin.
A simple loading and rolling sequence
The supplied record does not include a manufacturer’s step-by-step procedure, so the sequence below is a general approach based on how this type of machine is built. Treat it as a starting point and adjust only within what the machine’s parts allow.
- Check the paper length: Confirm your papers are 110mm King Size. If they are not, stop here; the machine is not sized for them.
- Seat the apron: Make sure the thick vinyl apron is flat and centered on the hemp-plastic base. Any twist or fold will throw off the roll.
- Place the paper: Lay the 110mm paper across the apron with the gum line facing you. Keep the paper square to the apron edges.
- Add your material: Distribute material evenly along the paper. An uneven line is the most common reason a machine roll comes out loose at one end.
- Roll forward: Use the apron to roll the paper and material forward in one smooth motion. Avoid stopping halfway, which can crease the paper.
- Seal and lift: Moisten the gum line, finish the roll, and lift the finished cigarette off the base.
Where the machine helps and where it doesn’t
A rolling machine is most useful when you want a consistent shape without relying on hand-rolling technique. The RAW Eco-Plastic Rolling Machine gives you a fixed 110mm paper width and a guided apron, so the main variable becomes how evenly you distribute material and how smoothly you roll forward. If you already roll by hand and are happy with the results, the machine is a convenience rather than a necessity.
The trade-off is flexibility: the machine is tied to 110mm papers, so it won’t help if you prefer other sizes. It also adds a piece of equipment to clean and store. The hemp-based plastic base and vinyl apron are the parts that contact paper and material, so keep them dry and free of debris between sessions. The supplied record does not include specific cleaning instructions, so avoid harsh solvents and stick to a dry or lightly damp cloth unless the manufacturer states otherwise.
Checkpoints before each roll
- Paper size is 110mm King Size: This is the machine’s stated compatibility; other sizes are not supported by the supplied information.
- Apron is flat and centered: A twisted apron is the most likely cause of a crooked roll.
- Material is evenly distributed: Even distribution gives the machine a consistent shape to roll.
- Base is on a stable surface: The hemp-plastic base needs to sit flat so the apron can move smoothly.


